China Flat Dripper Mould Factory for Drip Irrigation tape line

64 Cavity Semi Hot Runner Inline Dripper Mould 
 

Cooperated with China professional dripper mould manufacturer, which are specialized in designing and manufacturing various irrigation dripper mouds with cold runners or hot runners according to demands of customers.

The performance of the mouls have been proved to be excellent by test and through applicaiton by customers.

Main Features for Flat Driper Mould with Semi Hot Runner:

1. The mould adopts semi hot runner sytem, usually with 64 cabities or 128 cavities.

2. The cavity board can be changeable, thus producing drippers with different flow rate.

3. The mould adopts S136H as cavity insert material and Japan Punch steel as mould core, which can ensure lifespan beyond two millions shots.

4. The machining accuracy for the mould can reach 0.01mm, and roughness as Ra0.8.

5. The dripper manufacture deviation Cu is less than 1%.

6. The deviation factor for dripper flow rate is less than 5%.

7. Mould is designed with 2D/3D drawing.

8. Mould can be designed according to clients' request to dripper flow rate, diameter and length.

9. Mould base is from LKM of Shanghai.

10. Mould shot period is 10-12seconds.

11. Water circulation is used for the mould cooling.

12. An even and balanced subsurface gate is adopted for the mould cavity structure, with drippers push out by mandrils, so automatic production can be achieved.

Main Mould Parameters: